Prep. Protect. Perform.
Industrial sandblasting & coatings across Florida
MSHA certified crew out of Vero Beach. Pipelines, gas and water lines, potable water and wastewater tanks, sand mines and structural steel, blasted and coated on site.
- MSHA certified crew
- All of Florida, based in Vero Beach
- Mobile rig, on site
- Owner Justin Hearl on the job
Industrial & commercial
Most of our work now: surface prep and coatings for utilities, plants, mines and contractors, anywhere in Florida.
Industrial & Commercial
Abrasive blasting and industrial coatings for plants, utilities, mines and commercial buildings, anywhere in Florida.
Pipelines, Gas & Water Lines
Gas lines, water lines and above-ground piping blasted and recoated, with containment set up on site.
Water & Wastewater Tanks
Potable water and wastewater tanks blasted and recoated, inside and out.
Sand Mining & Conveyors
MSHA certified crew for conveyors, dredge equipment and plant steel at sand mines.
Recent industrial jobs
Trailers, trucks, cars & more
The mobile rig still comes to your yard for trailers, truck frames, classic cars, boats and gates.
Mobile Sandblasting
Our blast rig comes to your yard, shop or job site. Rust, paint and scale off, down to clean metal.
Vehicle & Trailer Blasting
Utility trailers, truck frames and dump bodies, stripped of rust and ready for primer.
Classic Car Blasting
Bodies, cabs, fenders and frames taken to bare metal so your restoration starts clean.
Boat & Marine Blasting
Salt-eaten boat trailers, metal hardware and hulls prepped for new bottom paint.
Painting & Coatings
Primer and paint right after blasting, before Florida humidity puts the rust back.
A trailer frame we blasted and painted. Drag the handle to compare.
Florida is hard on steel
Salt air, humidity and a storm most summer afternoons. Anything steel that lives outside on the Treasure Coast is rusting right now: trailers, truck frames, gates, railings, tanks.
Painting over rust doesn't stop it. Blasting takes it all the way off, down to clean metal, and leaves a rough surface that primer bites into. Then a good coating keeps the salt out for years instead of months.
Salt air
Coastal air leaves salt on metal that pulls in moisture and speeds up rust.
Humidity
Bare steel can flash rust within days, which is why we prime right after blasting.
Sun
UV breaks down old paint until it chalks and peels, and then the rust gets in.
How a job goes
Send photos
Text a few pictures and the location to (772) 539-3108, or use the quote form.
Free quote
We tell you what it takes, what it costs and when we can come.
We set up
The rig parks next to the item. Tarps and plastic go down around it.
Blast & coat
Rust and paint come off, then primer and paint if you want it. We clean up.
One classic sedan, before and after blasting. The two photos were taken from different spots.
Restorations start with bare metal
A classic car or old truck hides rust under every layer of paint and filler. Blasting shows you exactly what you're working with, and gives the body shop a clean surface to prime.
- Bodies, cabs, doors and fenders
- Full frames, suspension and small parts
- Ready for primer or your painter
Where we work
All of Florida. Industrial jobs take us statewide, from Jacksonville and Pensacola to Tampa, Orlando and Miami. Close to home, we cover the Treasure Coast every week.
- Vero Beach, FLHome base, Indian River County
- Sebastian, FLAbout 15 mi, north on US-1
- Fort Pierce, FLAbout 15 mi, south on US-1
- Port St. Lucie, FLAbout 30 mi, south on I-95
- Stuart, FLAbout 42 mi, south on I-95
- Jensen Beach, FLAbout 38 mi, south on I-95 or US-1
- Okeechobee, FLAbout 55 mi, west on SR-60
- Palm Bay, FLAbout 30 mi, north on I-95
Common questions
What areas do you serve?
All of Florida. We're based in Vero Beach and work the Treasure Coast every week, and our industrial and commercial crews travel statewide for pipelines, tanks, mines and plants. See the service area.
Are you MSHA certified?
Yes. Our crew is MSHA certified, so we can work on mine sites, including sand mines, conveyors and dredge equipment. See sand mining and conveyors.
Do you coat potable water and wastewater tanks?
Yes. We blast and recoat potable water and wastewater tanks. Send us the tank size, what's on it now and the coating spec if you have one. See water and wastewater tanks.
Do you really come to me?
Yes. That's what the mobile in our name means. We tow the blast rig to your house, yard, shop or job site and do the work where the item sits. Some smaller parts can also be done at our shop.
What about the dust and the mess?
Blasting throws spent media. We lay tarps and plastic down around the work, set up where the dust won't blow onto cars or houses, and clean up the spent media when we're done. Let us know about anything nearby that needs covering, like pools, cars or open windows.
How much does sandblasting cost?
It depends on the size of the item, how much rust and paint is on it, where it is and whether you want it painted after. The fastest way to get a real number is to text a few photos and the location to (772) 539-3108 or use the free quote form.
We're hiring
Sandblasters, industrial painters and laborers. We'll train the right people.
Get a free quote
Send us a few photos and where the job is. We'll tell you what it takes and what it costs, and we bring the rig to you.